Details that need to be paid attention to when installing automatic outdoor folding arm awning

2020-08-30

In modern life, automatic outdoor folding arm awning has become a very common modern construction equipment widely used in people's lives. Since it is often used, what kind of treatment measures should generally be carried out in the installation and construction process of the awning? The editor will give a detailed explanation on this point today.

1. The base layer of the waterproof sealing material must be flat, dense, damp, and clean enough. When there are stubbles on the surface of the base layer, it is generally necessary to use a wire brush to clean, and then brush with a cold base oil. When the cold base oil never sticks to your hands, fill in the waterproof sealing material again. When you encounter a blind seam, cut out the groove, brush with cold base oil, and insert the waterproof sealing material.

2. Generally, the waterproof sealing material should be short strips first, use force to insert it into the seam, and again use the caulking tool to compact the sealing material step by step to prevent gaps, separation and sagging, and then brush the surface with cold base oil again. , Compact and smooth. Note: Pay attention to the waterproof sealing material embedded in the balconies, sunshade boards, and side elevation gaps.

3. At this time, you need to pay attention to the awning board for the joints and the automatic outdoor folding arm awning to embed the sealing material in the cracks at the lower part of the wall, so no mistakes are allowed. Spread the mortar cap on the upper part of the seam; when making the second felt oil waterproof layer on the sunshade board, roll the linoleum along the wall root.

automatic outdoor folding arm awning

Exceeding is the treatment measures that should be brought to the attention of the constructors during the installation of the awning. It is hoped that it can provide assistance to the majority of friends, and the safety of the project can be prevented.


Disclaimer: This article is reproduced from other media. The purpose of reprinting is to convey more information. It does not mean that this website agrees with its views and is responsible for its authenticity, and does not bear any legal responsibility. All resources on this site are collected on the Internet. The purpose of sharing is for everyone's learning and reference only. If there is copyright or intellectual property infringement, please leave us a message.
©copyright 2009-2020 Plastics Daily      Contact Us   SiteMap